SunEnergyXT 11 kW Smart Wallbox AC11-3AE-B – Type 2 charging station for electric cars with Wi-Fi, RFID, app & OCPP

11 kW charging power, a permanently attached 5 m Type 2 cable and flexible controls for charging at home or in a workplace parking space.

Highlights

11 kW three-phase: The EV charger delivers up to 11 kW with a 400 V, 16 A three-phase connection. The charging power actually available depends on the vehicle, its onboard charger and the electrical installation.

Integrated 5 m Type 2 cable: The charging cable is permanently attached to the EV charger, so a separate Mode 3 cable is not required.

Flexible charging authorisation: According to the manufacturer data sheet, the model supports Plug-to-Charge, RFID card and app start modes. The available operating modes depend on setup and system configuration.

Connectivity: Wi-Fi, Bluetooth and Ethernet are specified; 4G is optional. The manufacturer data sheet lists OCPP 1.6 JSON and OCPP 2.0.1 J (upgradable). RS485 Modbus RTU and Modbus TCP are listed for local communication.

Robust enclosure: IP65 and IK10 according to the supplier's specification. The mounting location, mounting orientation, connections and environmental conditions must comply with the current installation instructions.

Control charging and manage access

Depending on the configuration, charging can be authorised directly, via RFID or through the app. This is useful when several people use the same charging point or when charging sessions need to be started and monitored individually.

For OCPP or Modbus connections, the backend, software version, access credentials and required functions must be checked for compatibility before commissioning.

For an exterior wall, garage or parking space

The EV charger is designed for wall mounting. Its integrated 5 m cable allows the charging point to be positioned so that the vehicle's charging socket remains within easy reach. Pole mounting requires a compatible mounting kit, available separately.

The IP65 rating does not mean that the device may be flooded, submerged or exposed to all weather conditions regardless of the installation instructions.

Technical specifications

Included in the set

• 1 × SunEnergyXT Smart Wallbox AC11-3AE-B
• 1 × permanently attached Type 2 charging cable, 5 m
• Wall-mounting bracket according to the supplier's specification

Additionally required

• A professionally designed three-phase 400 V connection
• Suitable cable, residual-current and overcurrent protection devices in accordance with the installation design and manufacturer requirements
• Mounting, connection, testing and commissioning by a qualified electrician
• A compatible RFID credential is required to authorise charging via RFID.

Not included

• Electrical installation, mounting service, wiring and external protection equipment
• Mounting pole and pole-mounting kit
• Vehicle and vehicle-specific adapters
• Mobile data contract or 4G communication module

Important information before buying

This EV charger is not a plug-in household appliance. Connection, protection design, testing and commissioning must be carried out by a qualified electrician. Registration, control and grid operator requirements for the specific site must be clarified before installation.

Charging power is determined by the lowest power limit of the EV charger, household supply connection, electrical installation, charging cable and vehicle. A vehicle with a lower AC charging limit will charge more slowly.

Frequently asked questions

Can the EV charger charge any electric car?

It is designed for vehicles with a Type 2 AC charging connection. Before buying, check your vehicle's charging connection, permitted AC charging power and compatibility.

How fast does the EV charger charge?

Up to 11 kW is possible when the technical requirements are met. Actual charging time depends on the vehicle, battery charge level, temperature and available connection power.

Can the EV charger be installed outdoors?

The enclosure is specified as IP65 and IK10. The chosen mounting location must still meet the requirements of the current installation instructions; connections and cable routing must be professionally protected.

Is installation included in the price?

No. Electrical installation, protection equipment, mounting, registration and commissioning are not included and must be planned separately.